(you are viewing a thread; or go back to
list of threads)
LDmicro 5301 does not accept MCU crystal <1MHz (by MGP)
I was trying to use the internal oscillator of 500Khz with a 16F88 and I can't use it.
Maybe for a next release. Thx.
...and in Github I can't post an issue.
1MHz (by Calubert)
MOV #0x8f
0x47
Si tiene oscilador interno Lo haces con mover el 47 en las PIC 1MHZ es exdecimal 47=1MHZ
(no subject) (by MGP)
That is not the question, I know very wel how to program the internal oscillator but you also have to tell ldmicro on which frequency it must work to calculate the cycle time, you can do that in the settings menu and that is what you can not do.
I does not accept nummbers below 1Mhz.
(no subject) (by MGP)
Hello Ihor,
I have tried that several times and every time I received a message that something went wrong, that's why I reported it here.
But I will try again.
(no subject) (by MGP)
Ok now its working. thx
(no subject) (by Calubert)
1MHz (por MGP) Aquí tienes como hacerlo te lo paso enescalera, HEX y con un cristal 0.50000, y tu comentario anterior creo que no hay que colocarse medallas.
<1MHz (por MGP) (by Calubert)
Hex fichero 0,50000 pic 88
<1MHz (por MGP) (by Calubert)
Tu error esta que usas el punto y tienes que colocar la coma.
coma (,) correcto; el punto (.) no correcto
(por MGP) (by Calubert)
Abriste mi programa y veras que se puede colocar la coma.
si te apetece mándame el software en escalera y te lo pongo yo y te lo hago en .HEX
(por MGP) (by Calubert)
OK MPG, en el programa que te he mandado por este foro copia la coma y pegarla en tu escalera.
Control (C) Copia, Control (V ) pega, o también puedes copiar la coma , esta y pegarla.
espero haber te ayudado, tienes que pensar que LDMICRO son Comas. y en tu anterior mensaje entendí que querías hacer el oscilador dentro del PIC-
(no subject) (by MGP)
Calubert, thanks for the offer but it works in Version 4430, so I can use this version for a start.
(no subject) (by Ihor Nehrutsa)
to MGP
What value used as a "Decimal symbol" in your Windows?
Try to change it.
(no subject) (by MGP)
I'm happy... now it works and sorry it's no bug but my lack of knowledge of windows.
Thank you very much.
Post a reply to this comment:
|