|
LDmicro Forum - configuration bits software problem |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
configuration bits software problem (by Alex)
Hello i have used configuration bits sowtware from:
https://github.com/LDmicro/LDmicro/wiki/PIC-Configuration-Bits i have used UsbPicProg, the thing is that when i used the software values i get a different config bits than if i type it in the white box, even if all bits are the same in both cases, why is it? (iamge attach)
(no subject) (by MGP)
x72 = 0111 0010
x42 = 0100 0010 Bits 4 & 5 are not implemented and read as 1, so both numbers are correct. Also 3F and 2F because bit12 is not implemented If you write 2F42 to the controller and read it back you get 3F72.
Post a reply to this comment:
|
|
|