LDmicro Forum - LDmicro.GitHub news v4.3.9.4

LDmicro.GitHub news v4.3.9.4 (by Ihor Nehrutsa)

https://github.com/LDmicro/LDmicro/releases/tag/4.3.9.4

== Release 4.3.9.4

Fixed: LDmicro Forum - pic16f887 http://cq.cx/ladder-forum.pl?a...;parent=7317&tt=1526403799
Recovered backward compatibility with version 2.3 for the SET PWM operation.
Recovered the READ_ADC operation for PIC16F887, PIC16F877, PIC16F88, PIC16F72.
Attention: Releases 4.3.8.5 - 4.3.9.3 has the bug with PIC's MCU READ_ADC: only RA0 analog input is available!

Fixed: The GEQ instruction does not work with neg.numbers #57
Try simulate GEQ.LD from the page
https://github.com/LDmicro/LDmicro/issues/57

== Release 4.3.9.3

Fixed: SET PWM instruction in Arduino Sketch.

* Wiki: LDmicro, Arduino, LCD
https://github.com/LDmicro/LDmicro/wiki/LDmicro,-Arduino,-LCD

Thu May 17 2018, 03:38:29, download attachment build4392.zip

(no subject) (by bfwolf)

To Ihor:

It's not possible since some releases including v4.3.9.4 to generate generic ANSI-C code by selecting
"Settings-Microcontroller-(no microcontroller)"
as is was possible before! :-(
v4.3.9.4 throws an error-dialogue (see attached JPG),
v4.3.9 crashed, as i remember right... :-(

I used the hello.ld sample for testing...

Could you please re-enable this feature? ;-)

Thanx in advance... ;-)

Thu May 17 2018, 11:12:23, download attachment no_mcu.jpg

(no subject) (by Ihor Nehrutsa)

to bfwolf
Will be restored in next release.

to Alex
could it be like 2.3v? No.

Thu May 17 2018, 13:20:15, download attachment menu Compile.JPG

LDmicro.GitHub news v4.3.9.5 (by Ihor Nehrutsa)

== Release 4.3.9.5

* Fixed: Re-enable ANSI C compilation with no MCU #95

Fri May 18 2018, 03:00:45, download attachment ldmicro4395.zip

(no subject) (by bfwolf)

Many thanx, Ihor! ANSI C compilation with no MCU works again :)
Now awaiting next full release with german-language... ;-D

Fri May 18 2018, 07:44:40

(no subject) (by Ihor Nehrutsa)

to bfwolf

1) Please translate to the German Language
lang-de-diffs.txt like the lang-de.txt

2) Please update the manual-de.txt according to the manual.txt

3) Please screenshot the LDmicro Help-F1 window inside the LDmicro.
I'm interested in how the umlaut symbols look.

4) Also, you can add/edit the manual.txt

to all
4) Also, you can add/edit the manual.txt

Fri May 18 2018, 08:15:13, download attachment lang-sort.zip

issue for DE lang localize(permanent) (by Ihor Nehrutsa)

DE lang LDmicro #97
https://github.com/LDmicro/LDmicro/issues/97

Please post to issue link.

Fri May 18 2018, 08:27:22

(no subject) (by bfwolf)

Hello Ihor ;-)

Yes, i'll take the job, to do the translation for the german-language ;-) But i'm always very busy with other work, so it will take some time... Perhaps, we'll ty do do it in several pieces - i'll give you back the translated lang-de-diffs.txt with a few (or more) phrases and you give me the resulting lang-de.txt and the new remaining lang-de-diffs.txt ... OK? ;-)
A question for this: should i write the german prases in the second line of each pair?

Perhaps someone else could take the translation of the manual-de.txt ??? Perhaps there could be a co-work of several people??

Regards

Sat May 19 2018, 16:53:25

(no subject) (by Ihor Nehrutsa)

to bfwolf

1)There are no time limits. When translate is ready, I include it to the next release.

2)Need to translate only lang-de-diffs.txt.
First line - English, second line - german.
See lang-de.txt as an example.

lang-de-diffs.txt will combine to lang-de.txt

3)Any one can work with lang-de-diffs.txt and manual-de.txt

Sat May 19 2018, 17:28:11