Analoge Input (by Ibrahim )
Hello every one
IS this method to represent Analog Potentiometer is good or there is another best way ?
conversor analogico (by jose caicedo)
he hecho una rutina con conversor analogo digital,
en la simulacion me funciona super bien, pero cuando hago pruebas fisicas con mi arduino no funciona
que puedo hacer en este caso?
(no subject) (by paulino)
por jose caicedo)
put your program I will prove it to you
pon tu programa que te lo probare
(no subject) (by gabriel)
Hello, hello friends if we want to take the reference Voltage, typical of the arduno nano, that we put in the RESF box 0, 1,2, or, 3?
(no subject) (by Ziggy)
Gabriel,
Depends on which microcontroller the Arduino is using.
If ATmega328 then
0 =>00 AREF, Internal V ref turned off
1=>01 AV CC with external capacitor at AREF pin
2=>10 Reserved
3=>11 Internal 1.1V Voltage Reference with external capacitor at AREF pin
from ATmega328 data sheet
section
28.9.1. ADC Multiplexer Selection Register
You will find similar information on other Arduino microcontrollers
(no subject) (by gabriel)
hello friends I have been seeing that putting a 6 or higher in the RESF box works correctly.