Home
Prox / RFID
Verichips
Ladder Logic
[interfacing] †
Tube Joints
Key Code From Photo
SolveSpace (3d CAD)
SketchFlat (2d CAD)
Photographs
Miscellany
Resume / Consulting
Contact Me

LDmicro Forum - TOF only for reset?

(you are viewing a thread; or go back to list of threads)

TOF only for reset? (by Tom J.)
Since when? Or am I doing something stupided?
Sat Apr 18 2020, 17:57:25, download attachment error.jpg
(no subject) (by Tom J.)
Forget it, I duplicated rungs and forgot to rename my TOFs appropriately. I did do something stupided.
Sat Apr 18 2020, 18:03:21
Nextion Enhanced HMI Solved (by Tom J.)
In this post I'm going to focus on sending and receiving serial data uart with the HMI. Enclosed in this zip file you will find a ladder and the HMI file to be used with the Nextion software.
The big hurdle was the stop bits And as it turns out sending those stop bits as hex was the problem.
There is a special character that needs to be used in place of 0xFF that can be obtained with a keyboard combination of ALT+0255 that must be used as the spot bits.
The ladder file is pretty well commented but I kind of jumped the gun on the HMI file and didn't do any commenting in there, fortunately the HMI file is pretty simple to understand as it sits.

Let there be Nextions in LdMicro!
Sun Apr 19 2020, 15:38:42, download attachment LdMicroVSNextion.zip
(no subject) (by Tom J.)
Well that didn't go according to plan, I was trying to make a new thread. Here it is

https://cq.cx/ladder-forum.pl?...;parent=9674&tt=1587325182
Sun Apr 19 2020, 15:41:01
Post a reply to this comment:
Your Name:
Your Email:
Subject:
(no HTML tags; use plain text, and hit Enter for a line break)
Attached file (if you want, 5 MB max):