|
LDmicro Forum - Aid in mini PLC with Atmega128 |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
Aid in mini PLC with Atmega128 (by Elvis)
Aid!
I am needing to develop a program for one mini PLC with Atmega128 for a school work, 1 display of LCD 16X2 as HMI and 1 keyboard for navigation of screens, as attached.
no subject (by simon)
Hi Elvis
Ldmicro cant work with Lcd 16x2 paralel . If you need , i can help you with an interface bitween Atmega128 programed with LDmicro and paralel LCD , but you need an extra microcontroler (Atmega8 = tested or ather) to conect atmega128 to LCD (16x1, 16x2, 20x2, etc) . you can contact me on : [email protected] or : ems-simon on Skype Is not posible to post here the software i use . Succes
Mini-PLC (by hunoell)
Hi Elvis,
have a look at my thread. I think, you'll find there, what you need. (ATmega128 with parameter setting) regards hunoell
ATmega128 with parameter setting (by Elvis Malinosky)
Olá
It would like a program in ladder with atmega128 to adjust to parameters in a display 16x2 and to set in motion relay and triacs. The drawing of the HMI this in annex. Please they help me!
Post a reply to this comment:
|
|
|