(you are viewing a thread; or go back to
list of threads)
LDmicro.GitHub news v5.4.0.3 (by Ihor Nehrutsa)
Thank you Ihor Nehrutsa (by Rajeev Rawal)
Dear Ihor Nehrutsa Sir,
I really appreciate for your efforts.
I am really happy to see new PIC MCU'S.
God Bless You.
Best regards,
Rajeev
(no subject) (by Ihor Nehrutsa)
(por Ihor Nehrutsa) (by Paulino)
cuando lo pasaras al
when will you pass it to
https://github.com/LDmicro/LDmicro/releases
since it only takes one day, remove the old one and place the new one, I don't think there is any problem, saying a small note to update 5.4.0.3.
(no subject) (by Luis)
Hello in the latest version 5.4.0.3 when compiling Call flasMcu does not create hex file
Cheers
(no subject) (by Luis)
In Folder AVRGCC
(no subject) (by José)
Please let us know:
- your target
- peripherals in use in ladder
Did you configure your flashMCU.bat file ?
BR
José
(no subject) (by Luis)
with Leader, with version LdMicro_5310 it worked.
with the latest version LdMicro_5403 it doesn't work.
Cheers
(no subject) (by Luis)
upload flashMcu.bat
I have changed .bat for .txt
(no subject) (by José)
Ok
But to make efficient tests and look at the right section of your flashMCU.bat I need to know:
- your target MCU
- the external peripherals in use (SPI, I2C, Uart, PWM, LCD...)
Waiting for precisions.
José
(no subject) (by Ihor Nehrutsa)
to Luis
Please, could you upload flashMcu.bat
from LdMicro_5310 (the worked version)?
(no subject) (by Luis)
Hello upload flashMcu.bat
Cheers
(no subject) (by Luis)
Version LdMicro_5310 Working
(no subject) (by Luis)
LdMicro_5403 Not working
(no subject) (by Luis)
Folder with Ladder Version LdMicro_5310
(no subject) (by Luis)
Thanks.
(no subject) (by Luis)
when compile with Atmel AVR-GCC don't create the file *.hex in the folder \AVRGCC\bin
(no subject) (by José)
I'm still waiting for your precisions about:
- target MCU
- peripherals
+ C compiler version
José
(no subject) (by Luis)
Hello José before it worked with any ladders now it doesn't work
(no subject) (by Ihor Nehrutsa)
I copied the paths
SET GCC_PATH=D:\01 - Programas Plc\Atmel\AVR-Gcc-8.2.0
SET AVRDUDE_PATH=D:\Programmation\Ladder\Programmes\Tests\Avr\AvrDude
from your LdMicro 5310 flash Mcu.bat
Please check the actuality of the paths.
(no subject) (by José)
There's a bug in ladder.h generated by version 5.4 when compiling for AVRs (double include).
José
bugs ao inserir mais instrução no Sketch (by Gilmar Roberto)
Hello ilhor Nehrutsa, I have been following your changes in LDmicro and I want to congratulate you for so much effort on your part in helping us with this excellent software for LADDER. Thank you very much for all your work. I really like the language and I've done several projects with it, including some on my channel (GR Alves on YouTube). My intention for my projects is to unify the LADDER projects in a single chip, since in the ladder it is not possible to read an ultrasound sensor and also a servo motor, with the simplicity that is done in Arduino. Only so far I haven't been able to bring the two together. I need your help.
bugs ao inserir mais instrução no Sketch (by Gilmar Roberto)
Lhe enviei o anexo temp1 com os meus arquivos para você testar e ver se é possível me ajudar a corrigir o problema. Tem um arquivo em LADDER e o convertido para o Arduíno e outro com acréscimo no sketch de um sensor ultrassônico, cujo o ero ocorre quando é feito esse acréscimo. Sem a implementação do sensor, a conversão funciona corretamente.
Aguardo sua resposta, um abraço e muito obrigado por seu grande trabalho.
Gilmar
Post a reply to this comment:
|