Home
Prox / RFID
Verichips
Ladder Logic
[interfacing] †
Tube Joints
Key Code From Photo
SolveSpace (3d CAD)
SketchFlat (2d CAD)
Photographs
Miscellany
Resume / Consulting
Contact Me

LDmicro Forum - LDmicro.GitHub news v4.4.0.2

(you are viewing a thread; or go back to list of threads)

LDmicro.GitHub news v4.4.0.2 (by Ihor Nehrutsa)
https://github.com/LDmicro/LDmicro/releases/tag/4.4.0.2

== Release 4.4.0.2

* Optimized: PIECEWISE LINEAR TABLE (reduced size 10%), ADD and SUB operations for PIC's.

* Fixed: READ ADC for EnhancedMidrangeCore14bit PIC's.

* Fixed: AUTO_PAGING version 4.3 for PIC's.

* Wiki: Disable Pull up resistors
https://github.com/LDmicro/LDmicro/wiki/Disable-Pull-up-resistors

* Wiki: Pull down resistors
https://github.com/LDmicro/LDmicro/wiki/Pull-down-resistors

* Added: REFS parameter for ADC Voltage Reference.

* Wiki: ADC Voltage Reference
https://github.com/LDmicro/LDmicro/wiki/ADC-Voltage-Reference

How to measure battery voltage (Atmel AVR)
https://github.com/LDmicro/LDmicro/wiki/How-to-measure-battery-voltage

How to measure voltage (PIC)
https://github.com/LDmicro/LDmicro/wiki/How-to-measure-voltage-(PIC)
Mon Jun 18 2018, 09:12:37, download attachment build4402.zip
(no subject) (by Alex)
thanks Ihor:)
Mon Jun 18 2018, 11:32:06
(no subject) (by Alex)
when i open a ld file then i press MCU parameters ldmicro closes
Tue Jun 19 2018, 15:40:51
(no subject) (by Alex)
it happens when i downloaded you ladder from:

http://cq.cx/ladder-forum.pl?a...;parent=7299&tt=1526869620

called "Pwm_Bright_Pot.ld"

it is selected 328p mcu, so i change to pic 16f877a in the same ladder then i press MCU paramters then ldmicro 4.4.0.2 closes, but if i do the same with 4.4.0.0 it gives me an error message wich is ok to show it, but in 4.4.0.2 instead of showing the error message it closes
Tue Jun 19 2018, 15:53:04, download attachment error mcu parameters.jpg
encoder block (by Ziggy)
Hello Ihor,

Thanks for the work You put in.

I was looking at the issues associated with quadrature encoder the other day and decided to fire up this latest offering just to check if LDmicro suported the encoder in ithe rapidly evolving environment.

And lo and behold a line " EDIT: insert QUAD ENCOD " looked back at me inviting me to try it out.

Well quick as a flash and without missing a step i opened a ladder file just to see what its all about.... and here I am none the wiser....

Ihor, Please where is this tantalising tid bit going and when?
Thu Jun 21 2018, 22:34:56
Post a reply to this comment:
Your Name:
Your Email:
Subject:
(no HTML tags; use plain text, and hit Enter for a line break)
Attached file (if you want, 5 MB max):