|
LDmicro Forum - too small time for Delayed turn off |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
too small time for Delayed turn off (by ibrahimattaka)
I want to make a program and use Delayed turn off timer with 30 min but its datatype is 32767 .Is any arrangement to overcome of this problem
(no subject) (by Ihor Nehrutsa)
1) You can increse PLC cycle time. Toff=Tplc*32767
2) -TOF-OSF-TOF-OSF-.....
(no subject) (by ibrahimattaka)
please checkout my program I made easily along time by using interior watch but the problem of make reset is still exist
(no subject) (by Ihor Nehrutsa)
This is not full solution.
(no subject) (by ibrahimattaka)
analog input for temperature when becomes 700/1023 it goes high when drooped goes low & the timer starts and After 2 min or more it starts again.and this operation should be repetitive
(no subject) (by MGP)
You posted the wrong file, we need the xxxx.LD file
(no subject) (by ibrahimattaka)
sorry the correct file here
(no subject) (by MGP)
I do not fully understand what you want, but here you have a programm as I see it.
(no subject) (by MGP)
I forgot to set the timers to 1 sec, I changed it for testing the program.
This version is the good one.
(no subject) (by ibrahimattaka)
thanks a lot the final project is here
Post a reply to this comment:
|
|
|