Home
Prox / RFID
Verichips
Ladder Logic
[interfacing] †
Tube Joints
Key Code From Photo
SolveSpace (3d CAD)
SketchFlat (2d CAD)
Photographs
Miscellany
Resume / Consulting
Contact Me

LDmicro Forum - LDmicro.GitHub news v4.2.0

(you are viewing a thread; or go back to list of threads)

LDmicro.GitHub news v4.2.0 (by Ihor Nehrutsa)
https://github.com/LDmicro/LDmicro/releases/tag/4.2.0

== Release 4.2.0

* Fixed: PIC Configuration Bits hexadecimals.

* New: Element TIME to COUNTER converter
https://github.com/LDmicro/LDmicro/wiki/TIME-to-COUNTER-converter

* New: Element DELAY us
https://github.com/LDmicro/LDmicro/wiki/DELAY-us

* New: PLC Cycle Time 0
https://github.com/LDmicro/LDmicro/wiki/PLC-Cycle-Time-0

* New: LABEL and GOTO instruction
https://github.com/LDmicro/LDmicro/wiki/GOTO-instruction

* New: SUBPROG, RETURN, ENDSUB and GOSUB instruction
https://github.com/LDmicro/LDm...,-ENDSUB-and-GOSUB-instruction

* Add: Menu->Config->Select color scheme->Select user colors

* Wiki: LDmicro color schemes
See https://github.com/LDmicro/LDmicro/wiki/LDmicro-color-schemes

* Wiki: HOW TO: The AND, OR, XOR logic operations on CONTACTs inputs
See https://github.com/LDmicro/LDm...-operations-on-CONTACTs-inputs

* Spanish manual-es.txt added. Thanks Jose Manuel Ruiz Gutierrez.
Mon May 8 2017, 11:55:35, download attachment build420.zip
(no subject) (by Alex)
yeah first one here :)
Mon May 8 2017, 12:05:11
(no subject) (by Antonio)
Thank you Ihor Nehrutsa

Regards
Mon May 8 2017, 15:40:40
(no subject) (by Alex)
thanks for all you work Ihor, i was trying GOSUB, SUBPROG and ENDSUB, i´m new at these, while comparing simualtion from LDMICRO and PROTEUS i´ve seen that it works as i spected in proteus while not in LDMICRO, i think it is due to what you described in: http://cq.cx/ladder-forum.pl?a...;parent=6233&tt=1493628250

In ldmicro both leds work (led1 for SUBPROG H1 and led2 for SUBPROG H2) even if i call just "SUBPROG H1".
Mon May 8 2017, 23:33:28, download attachment SUBPROG.rar
(no subject) (by Alex)
When compiling to ansic, ladder that inludes master relay, it appears an error mesage that says "LDmicro error INT 2021" and ansi c generatedis incomplete, then LDmicro closes, is it due to that master relay is not supported in ansi c?
Fri May 12 2017, 01:03:24, download attachment LDmicro_error_INT2021.rar
(no subject) (by Alex)
In 4.1.8V compiles ansi c with no problem using same ladder program
Fri May 12 2017, 13:29:54
(no subject) (by Alex)
i get an error when using cycle time 0 ms with 4.2.0, it works ok, but the message shows up when going to MCU parameters, the after clicking accept it shows up again
Sat May 13 2017, 17:37:14, download attachment Plc cycle less than 0.100 ms not valid.jpg
(no subject) (by Alex)
after clicking accept
Sat May 13 2017, 17:37:46, download attachment Plc cycle less than 0.100 ms not valid_2.jpg
(no subject) (by Alex)
finally when i want to close ldmicro 4.2.0 and then click in no save, this message shows up(image attach)´and then it ldmicro doesn´t close it keeps there, in the second time i want to close it closes, dont kwno what it is, it happened to me twice, then it closes normally
Sat May 13 2017, 17:41:19, download attachment Zero configuration word not valid.jpg
(no subject) (by Ihor Nehrutsa)
Tue May 16 2017, 19:47:43
(no subject) (by Alex)
thank you very much
Wed May 17 2017, 02:33:53
Post a reply to this comment:
Your Name:
Your Email:
Subject:
(no HTML tags; use plain text, and hit Enter for a line break)
Attached file (if you want, 5 MB max):