In releases 4 counter CTC not be the rightmost instruction in its rung
Sun Dec 11 2016, 12:01:14
(no subject)(by Alex)
please, choose another name
Mon Dec 12 2016, 03:43:59
(no subject)(by bfwolf)
To Alex:
Ihor changed the behaviour of all counters in that way, that their right pin is an overflow-signal-output. Because of this NEW-FEATURE counters can be connected in series (counter-right counts overflows of counter-left)! It makes sense, that the right-pin of a counter must NOT be connected to the ground-signal because this would give a short-circuit!
Regards
Mon Dec 12 2016, 04:21:00
(no subject)(by Ihor Nehrutsa)
Count seconds, minutes, etc.
Mon Dec 12 2016, 19:17:50, download attachment ctc_osr.ld
(no subject)(by Alex)
what do you use the Open-Circuit element for in ctc_osr.ld?
Mon Dec 12 2016, 21:26:32
(no subject)(by Ihor Nehrutsa)
In simulation mode I don't wait 1sec every PLC cycle. I select 'OPEN' then press space, get the 'SHORT'. And then simulate without waiting. In work version OPEN-SHORT will be deleted.