|
LDmicro Forum - Wireless control |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
Wireless control (by André Luiz "Brazil")
Wireless control
some example to create program for wireless control with PIC16F628A using as a transmitter and receiver?
(no subject) (by Ihor Nehrutsa)
HOW TO: Bluetooth1
https://github.com/LDmicro/LDmicro/wiki/HOW-TO:-Bluetooth1
(no subject) (by André Luiz Brazil)
friend, How would I Program FOR link circuit below
https://i.ytimg.com/vi/PxUFWnPt4AI/maxresdefault.jpg
(no subject) (by Ihor Nehrutsa)
U2 MODULO RX, U3 MODULO TX - what is it?
Wireless (by Andre Luiz ( Brazil ))
U2 MODULE RX, U3 MODULE TX, are trasmissor rf and rf receiver operating at 433.92 MHz. www.robertoinzerillo.com/wordpress/wp-content/uploads/2012/10/RF-433MHz.jpg
(no subject) (by Ihor Nehrutsa)
Can anybody publish Proteus model of FS1000A/XY-FST, XD-RF-5v,
or TX433, RX433 RF modules. (315MHz / 418MHz / 433MHz/ 915MHz)
(no subject) (by MGP)
They simply sending raw uart 2400b signals.
Attached a schematic of the transmitter.
(no subject) (by MGP)
This link gives you a better view how to connect the modules.
http://randomnerdtutorials.com...-receiver-module-with-arduino/
(no subject) (by Ihor Nehrutsa)
Arduino Rf module simulation in Proteus
http://theelectronics.co.in/arduino-rf-module-simulation-proteus/
(no subject) (by Ihor Nehrutsa)
HOW TO: RF (315MHz, 418MHz, 433MHz, 915MHz) modules with PIC's and AVR's
https://github.com/LDmicro/LDm...)-modules-with-PIC's-and-AVR's
Wireless control (by nadi)
hello everyone .... in the example given .... control is only for output ... can it be used for internal relay .... thanks and best regards
(no subject) (by nadi)
I am interested in making this as an IO expantion ... or as an IO remote ... But of course this must be made for internal relays first
(no subject) (by MGP)
In this link in Dutch you can see the schematic and a video of serial communication link. Post time 12:22:23
It send 16 bits input over serial to 16bits out. You can change it with internal relays. In the zip files below you can find the receiver and sender LD program.
(no subject) (by MGP)
Post a reply to this comment:
|
|
|