Formatted String Over UART has an error. (by Ihor Nehrutsa)
This error is SELF-starting of "Formatted String Over UART" instruction.
It's displayed in LDmicro simulation mode.
It is visible if microcontroller are programmed and connected to a COM port of a computer.
"Formatted String Over UART" start to sending a string every time after reset.
Correct operation in this case is: no characters should not be sent to the UART port.
Please examine LDmicro with attached file.
(no subject) (by Ihor Nehrutsa)
Thanks, I looked.
But, IMHO, this is another error.
In this case, obviously no characters to be sent in UART.
Rungs has 'Open-Circuit'
and 'Formatted String Over UART' should not work.
(no subject) (by MGP)
It is "normal", I have it too.
You cannot, in any way, avoid this.
At startup it's send all the strings and characters to the UART even with open rungs.