bug Report? (by Mityeltu)
I have been working with this for only a little while, so I may be wrong, but there appears to be some errors in the complied version of the ladder logic. The ld file is attached. The file was created from a student exercise for LogixPro. Maybe someone can see where I may have gone wrong.
The problem is that when there are no inputs, the fullopenled output flashes. This is not a correct response. The fullopenled should be on, but not flashing. A similar problem occurs when ls1 and ls2 are closed - the fullclosedled flashes. Again, the fullclosedled should be on, but not flashing.
hope someone can point me in the right direction.
(no subject) (by Mityeltu)
No, the external crystal is 2MHz. I'll try 20, but I don't have one of those right now.
The Oshonsoft PIC Simulator also gives this strange behavior using both 2 and 20MHz
(no subject) (by MGP)
You dont have to buy a 20Mhz crystal, I thought that this was a mistake.
Dont use external simulators, Ldmicro's is the best ;)
I will look further.