(you are viewing a thread; or go back to
list of threads)
SCADA for LDMicro (by erol CALISKAN)
very simple and free SCADA for LDmicro
www.micset.net
(no subject) (by Max)
This site is reported as suspicious by zonealarm
if somebody is dare to test it out, please leave a feedback here
thanks
no subject (by simon)
Hi
I do not understand how to use this program.The program generates all sorts of errors.I do not understand how it can be used with LDmicro.
(no subject) (by David R)
This looks SO GOOD I have down loaded it and in 5 minutes I had a simple sreen made.
The simple integration with LDmicro is that the SCADA can receive ascii serial strings which LDmicro easily produces.
I have been looking for this kind of thing for a long time thanks erol CALISKAN.
It looks like the program will error if you don't have A comm-port
Regards
David
(no subject) (by Max)
Thanks David for the feedback!
I will give it a try
no subject (by simon)
Thanks David for clarification. Scada can create applications that work independently? It can compile applications?
Thanks
(no subject) (by Samukelo Shezi)
David, what program did you use to open it cause it is a *.rar file?
(no subject) (by David R)
Hi Simon, I think the scada can do some logic through I have only spent 1 hour working on it.
I would allways do all the work in the PIC or atmel
because I allways want my items to run on there own with out the dependency of the PC
Hi Samukelo Shezi, I can't rember what program I use I think it is winrar or winzip.
no subject (by simon)
Hi Samukelo Shezi
I use 7zip http://www.7-zip.org/
Hi David
I wonder if I can use this program to display various data sent by the microcontroller, eg a thermometer.
(no subject) (by David R)
absolutely open some of there example programs.
you can scale the data in the micro or in the SCADA page
it was not hard to build this program to send some data to the scada page which moved the meter on the screen.
Regards
David
(no subject) (by Boris)
Need schematics for connecting pic and PC
(no subject) (by David R)
The pic produces ttl logic so A converter is needed see below
(no subject) (by Samukelo Shezi)
Thanks Simon and David and everyone else in this thead for your valuable inputs (excuse the pun, lol!)). Winrar worked!
(no subject) (by Evan Raftery)
Had a look at and is fantastic stuff. Support for ethernet and multiple micros make this a must have.
(no subject) (by Evan Raftery)
And Modbus too. Had this talking to a Panasonic PLC.
Can now connect micros to PLC via this interface.
Fantastic!
(no subject) (by jp_)
Hello,
anyone know where to find a tutorial or a help file. I am trying to simulate a serial communication using the simulator Com Capture Ver 2.4 and get the following error.
Write file function failed (Win error cod:6)
Any idea about the problem.
Thanks
jp_
(no subject) (by Faraon)
Hi,
for now micset has no help file, but i think that they working about that.
Actualy micset is very simple program just you should work with him little more and you will understand how it works.
About your problem.
Use Lastest version XEdit4.3 and Com Capture 3. This problem is fixed there.
If you continue to get same message check your com port, this message means that you Com Port cannot send/recieve data from Scada.
Check your Ascii protokol ports. You can use virtual com ports, for try like (Elitma VSPD software).
If you have any other questions write to Micset Support, they have feedback form, and they will answer you correctly.
(no subject) (by vishal sharma)
hi david.i have tried your sample scada code using micset.it works fine but can u plz send me the same sample code by replacing the formatted string over uart instruction by repacing it with uart send instruction.
thanks.
(no subject) (by slim)
Guys please I need assistance in synchronising pic 16f877 with the micset scada.David can you please help with more explanation as to configuring the scada software to recognise pics.
Thnks for the assistance.
Post a reply to this comment:
|