(you are viewing a thread; or go back to
list of threads)
CONADOR MINUTOS Y HORAS (by MANUEL)
HOLO AMIGOS DEL FORO NECISITO HACR UN COTADOR QUE ME CUENTE
MINUTOS Y HORAS CON 4 DIGITOS DE 7 SEGMENTOS CON UN PIC16F628
SI AIGIEN DEL FORO SAVE COMO HACELO EPIDO AYUDA
GRACIAS MANUEL
(no subject) (by MANUEL)
CONTADOR MINUTOS Y HORAS (por MANUEL)
HOLO AMIGOS DEL FORO NECISITO HACR UN COTADOR QUE ME CUENTE
MINUTOS Y HORAS CON 4 DIGITOS DE 7 SEGMENTOS CON UN PIC16F628
SI AIGIEN DEL FORO SAVE COMO HACELO EPIDO AYUDA GRACIAS
MANUEL
(no subject) (by OnosTech)
COTADOR MINUTOS Y HORAS (by MANUEL)
Hola OnosTech
muchísimas gracias por a verme contestado yo lo tengo con
2 dígitos 7segmentos pero hasta 4 dígitos no se como se hace
por eso yo pedía ayuda yo veo tu pagina que por cierto es muy buena veo algunos videos pero en segmentos de 4 dígitos no
veo ninguno te mando como yo lo tengo hecho a ver si me puede ayudar muchas gracia Manuel
(no subject) (by MANUEL)
hola OnosTech TE REPITO ESTO PARA ENVIERTE EL PROGRAS
PARA QUE LO PUEDAS ABRIR CON LDMICRO
GRACIAS
(no subject) (by OnosTech)
I will look at it and revert.
Lo miraré y volveré.
(no subject) (by OnosTech)
Please attach the LDmicro file of your work
(no subject) (by OnosTech)
Hi Manuel,
Find attached. It has a menu option where the time can be adjusted. I only did some LDmicro simulation. You will need a microcontroller with more pins like PIC16F876A. Check it if it is okay.
(no subject) (by OnosTech)
Hi Manuel,
Made some changes to the earlier attachment and tested this on PIC16F628A with internal 4Mhz Oscillator and internal MCLR. All pins except the power pins are used as I/O. The time is not accurate. Maybe will be accurate with a crystal oscillation. Check and adapt it to your need.
CONTADOR NIMUTOS Y HORAS (by MANUEL)
hola by OnosTech
muchísimas gracias por a verme contestado a mi pregunta
sobre el contador de horas y minutos quizás yo no me explicado bien yo tengo un secuenciador de 60 les que son 60segondos
cada sesenta segundos me tenia que contar un minuto esto son 2 pics 16f877 y una salida de uno de estos dos pics entraria al contador de minuto y horas yo lo hice con dos dígitos
quería hacerlo con 4 dígitos deplesados por eso te pedía ayuda
porque yo llego hasta 2 dígitos pero a 4 no se como se hace yo te mando mi programa que se abre con ldmicro y me gustaría continuar es sistema muy agradecido te mando mis programas para que los veas se abre con ldmicro y con proteos 8.11 siete figa tengo hecho con contadores cd4026 yo lo quería reducir uno solo pic 16f628
por cierto e probado el programa que me has mandado lo e probado en proteos y
ami no ha funcionado con un pantalla de 4 dígitos anodocomun
(no subject) (by OnosTech)
Hi Manuel,
Check this attachment. I have not tested nor simulated it. But I am sure you can work with the idea.
(no subject) (by MANUEL)
by OnosTech
Muchas gracias por haberme contestado
e probado el programa que me has mandado pero a mi no
no me a funcionado temando el esquemático como lo tengo hecho
en proteos para que tu lo veas silo ves ay un reloj hecho con
4 cd4026 y uno 4073 mi idea era caviar por un pic 16f628
por eso yo te pedía ayuda para hacerlo con 4 dígitos
Un saludo Manuel
(no subject) (by OnosTech)
Hi Manuel,
The proteus file can only open in version 8.11 which I don't have. If you can convert it to an earlier version, then I can look at it again.
Contador (by MANUEL)
OnosTech
según proteus no funciona en versione anterior
gracias por todo Manuel
Post a reply to this comment:
|