How to use I2C library for LCD 16x2 Display
___________________________________________

This library is designed to use a 16x2 LCD Display connected to an I2C IO-Expander 
module, like Arduino's one

Files: 	LcdI2cLib.c
	LcdI2cLib.h
	I2cLib.c
	I2cLib.h

Edit I2cLib.c with any text editor and replace in line :
#define LCD_I2C_ADR	0
the final value 0 by the I2C address of your I2C module (maybe 0x27)
according to its documentation

In LdMicro, create a ladder using I2C Write function and use this address
to access LCD display, with 'register' field= 255
(this value can also be modified in library as above if need be)

In the 'send variable' field, you can put a variable or a value, knowing that
there are 3 possibilities:

- values between 0 and 0x10 are commands (described in libraries):
 	0x00= Erase display
	0x01= Cursor home
	0x02= Blinking display
	0x03= Normal display

	0x0F= Backlight off (if available)
	0x10= Backlight on (if available)

	Other values / functions can be added in libraries

- values above 0x80 are move commands to move cursor to line y, col x:
	bit  7= 1
	bits 6-5= y-1	allows 4 lines 1->4	
	bits 4-0= x-1	allows 32 columns 1->32

	Example: 0xA5 = 1 01 00101 will move cursor to line 2, column 6

- other values between 0x11 and 0x7F are standard chars to display at cursor position

It normally doesn't prevent to use other I2C devices on the same bus
It has been tested successfully on AtMega16 et AtMega328

JG