|
LDmicro Forum - Presist Problem |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
Presist Problem (by MedTronic)
Dear all my friends
i have confused about presist function a same ld micro program but different result it works fine with pic16f628 but dose not work with atmega8 please help me where was the problem
(no subject) (by MedTronic)
a Proteus File for pic16f628
(no subject) (by MedTronic)
same file different results
(no subject) (by MedTronic)
Atmega8 proteus file
(no subject) (by Medtronic)
Dear my friend
To MPG.. And others please help I am stuck Thanks in advance
por Medtronic (by Paulino)
How do you record Chic (with what recorder and software do you record atmega8)
Como grabas el Chic (conque grabador y software grabas el atmega8)
(no subject) (by Paulino)
Memory Size 0x00002000
(no subject) (by Paulino)
I simulate it with Proteus and it works well for me. Proteus 8 Professional. As I have done, I copile LDMicro to file.Hex In the microcontroller configuration set the timer to 0 no 1, this must take into account the timer in the configuration. I attached the .hex for you to try, I would like it if it works correctly for you to inform me. Thanks Paulino As I have done, I copile LDMicro to file.Hex In the microcontroller configuration set the timer to 0 no 1, this must take into account the timer in the configuration. I attached the .hex for you to try, I would like it if it works correctly for you to inform me. Thanks Paulino
(no subject) (by MedTronic)
Dear my friend Paulino
i Test your hex file it give the same result (not saving to EEPROM ) i configure atmega8 with timer0 i attach a screen shot for proteus note that EEPROM data is FFFF Please help me
(no subject) (by Paulino)
Hola MedTronic, El programa funciona en la simulación con LDMicro,
en proteus ami también. tienes una protoboar carga el chic y lo pruebas para mi te funcionara ya que lo que le pedimos al software lo hace bien. te adjunto un programa para que veas por el simulador UART (terminal) que lo guarda bien. que idiomas hablas o de que país eres. Hi MedTronic, The program works in the simulation with LDMicro, in proteus ami too. You have a protoboar load the chic and the tests for me will work because what we ask the software does well. I attached a program for you to see by the UART simulator (terminal) that saves it well. What languages do you speak or what country are you from?
(no subject) (by MGP)
MedTronic, I'm using PIC's no AVR's and it works always, my latest program was for a 16F1827 and it works too.
Sunday I soldered 2 prints with 16F1527 on them, TQFP-64 to test them if I have time, but I don't expect any problems.
(no subject) (by Paulino)
Hello MGP, if I already talk about this topic that the PIC works for MedTronic.
the problem is that it does not work on the ATMega8-28Pins. I do all the tests in both LDmicro and Proteus and everything works correctly. The case is, in this case forget about the PIC and to help you have MedTronic you have to work with the Atemega AVR8, in this case. I think it is the way not to make too much of the Forum's doubts. Regards Paulino. Hola MGP, si ya hablo sobre este tema que las PIC le funciona MedTronic. el problema es que no le funciona en el ATMega8-28Pines. yo hago todas las pruevas tanto en LDmicro como en Proteus y todo funciona correcto. el caso es, en este caso olvidarse de las PIC y para ayudarle ha MedTronic hay que trabajar con el AVR Atemega8, en este caso¡. Creo que es la manera de no liar mucho a las dudas del Foro. Saludos Paulino.
(no subject) (by Paulino)
Esto es lo que me hace con proteus
(no subject) (by Medtronic)
Dear paulino
Look at the top left of your image.. Look at avr eeprom.. You will find a data is ffff 00 ffff that means the variable is saved at the memory (sram) but not saved at EEPROM To MGP my problem is with atmega8 not with pic micro... Please review and help Thanks in advanced Medtronic
(no subject) (by Paulino)
Please test the integrated circuit recorded with the .hex
on a test plate and it has to work for you since your image gives all fff and my image on line 60 will see the data that is not fff. This may be that your proteus is not up to date. I repeat: Try live with the atmega8, loading the .hex If it is correct, forward me the OK. if it is not correct tell me to continue investigating where this type of error is.
(no subject) (by Medtronic)
Thanks paulino
I will test and inform you
(no subject) (by Medtronic)
Dear my friend paulino
I test the program.. It work for real hardware But still their is a problem with proteus Please solve it... It will be very helpful... I think it is a bug with ldmicro Thanks in advanced
(no subject) (by Paulino)
I do not understand well, You have loaded the .hex code to the atmega8 CPU and it works correctly, it is as I commented.
caso erroneo creo que por proteus (by Paulino)
I have tried everything with ldmicro, simulating and everything is perfect.
Proteus libraries have to be updated, my PC is Win10 64bit 32GB memory, I use Proteus 8 Professional. and the truth was quite a few problems to adjust the libraries and I had to use this program (Library Loader). I always go to LDMICRO since I am a programmer of automatons (PLCs) of all brands, DELTA, siemens, etc. In a nutshell I think the error is not in LDMicro, it is in proteus (libraries). about that chic atmega8. because as you say in the PIC16fxx it works in proteus because the libraries are correct, but keep in mind that you can use PIC that the libraries do not work.
(no subject) (by Medtronic)
Dear paulino
Can you pleas explain what do you mean by adjusting the libaraies.... And what is the library loader.... Thak you very much for your help but please help me to solve the problem And please run the proteus simulation And show me the screen shot again Please MedTronic
(no subject) (by Paulino)
My email is [email protected].
send me a hello and I'll attach the proteus tell me the language mi correo es [email protected]. mandame un hola y te adjuntare el proteus dime el idioma
(no subject) (by Paulino)
yo destruir la prueba, pero sacarla de este mismo foro ya que esta hay.
I destroy the test, but take it out of this same forum since this is
(no subject) (by Ihor Nehrutsa)
The issue is created.
LDmicro Forum - Presist Problem #215 https://github.com/LDmicro/LDmicro/issues/215
Post a reply to this comment:
|
|
|