External interrupt for AVR (by Ahmad sakr)
To José
To Ihor
Is it possible to have interrupt in the next release of LDMICRO in c mode to have the ability of high speed counter (high pulses encoder)
(no subject) (by MGP)
Ldmicro is all interrupt, the plc timer generates an interrupt to start the program every plc cycle time.
If you make even more interrupts, the timers and the PLC cycle time are no longer correct, because you interrupt the LD program every time a pulse comes in.
But if that should be possible then you will still be bound to the PLC cycle time, you can't escape from that.