(you are viewing a thread; or go back to
list of threads)
Automatic Car Mirror Controller (by MedTronic)
Dear all friends
i need a ldmicro program to control a car mirror for automatic open at ignition start and automatic close with ignition stop
the time for open and close is controlled by adc input
after automatic open ... i can control it manually to open or close
thanks .... best regards
Controlador automático de espejo de coche (por MedTronic) (by Paulino)
Hello MedTronic, act a program and attach it, verify that if it is correct.
Hola MedTronic, acte un programa y lo adjuntas, lo verificare que si es correcto.
(no subject) (by MedTronic)
hello my friends
i need your help i can't even start ... please help
(no subject) (by José GILLES)
Yous should start as everybody, with some blinking leds...
JG
(no subject) (by MedTronic)
hi GILLES
thanks for your replay
can you give me a start point program .... that i can devlepment
(no subject) (by Ziggy)
Why did You pick on LDmicro?
Do you "speak " any other languages for example C or Arduino dialect of C++?
We can not help unless You can speak our ( LDmicro ) language.
All we can say is google ladder logic programing.
Learn to understand the programing and then we can elp You with Your first sentence in the new language.
There is a tutorial that comes with LDmicro but the point is YOU amd only YOU must learn the programing language and not ask or a solution to a problem You want to solve because You will not be able to understand the solution in case the solution does not do exactly what You want.
So learn the meaning of various symbols in Ladder Logic diagram and then we can speak the same language.
espejo de coche (by Paulino)
The program you are requesting has a lot of work, since you have to control the pressure offered by the engine, if it does not have micro switches for the travel limit, and make the user move the working times plus the limit pressures, such as Once you know how to do it, you have to choose the correct microprocessor for this, the outputs have to be PWM to control the H-bridge, so you have to know about wharware as software. you ask for a project and that is paid since it takes a lot of hours for testing trials etc.
Attached is a program that controls an engine so you can see what you are asking for more,
If you read it, you can bring your program.
El programa que pides tiene bastante trabajo, ya que se tiene que controlar la presión que ofrece el motor, si no tiene microrrudtores para el limite de recorrido, y hacer que el usuario pueda mover los tiempos de trabajo mas las presiones de limite, como una vez saber como hacerlo se tiene que elegir el microprocesador correcto para ello,la salidas tienen que ser PWM para controlar el puente en H, osea que se tiene que saber de wharware como software. pides un proyecto y eso se paga ya que lleva un montón de horas para pruebas ensayos etc.
(no subject) (by MedTronic)
dear sir Paulino
i can't understand the comment ... please can you write it in English please
(no subject) (by Tom J.)
This project really isn't too difficult, the idea of using a timer to actuate it is not all that great. Really it should have limit switches. If you read some stuff online you should be able to do this in a couple days.
para (por MedTronic) (by Paulino)
The comment is in Spanish since it is a working project, copy the comment and translate it into a translator I do it in google translator and I have also translated this comment into English.
El comentario esta en español ya que es un proyecto en funcionamiento, copia el comentario y lo traduces en un traductor yo lo hago en google traductor y también he traducido este comentario al ingles.
Post a reply to this comment:
|