|
LDmicro Forum - LDmicro.GitHub news v4.4.3.0 |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
LDmicro.GitHub news v4.4.3.0 (by Ihor Nehrutsa)
https://github.com/LDmicro/LDmicro/releases/tag/4.4.3.0
== Release 4.4.3.0 * New: 7-SEGMENT FONT CONVERTER instruction. * New: BINARY TO BCD CONVERTER instruction. * Fixed: QUADRATURE ENCODER start value. * Fixed: build failed in CCS when disabling pull up resistor #128 * Fixed: #USE RS232 & #USE DELAY ansi c generator for PICC build fails depending on their position #127 * Fixed: Russian localization * PIC: You can flash the PIC MCU thru the PICkit 3 Command Line Interface. Press F6 to call flashMcu.bat See flashMcu.bat and readMcu.bat
(no subject) (by Alex)
still having problems with disabling pull up resistor in picc,with MOV element and Set bit element
(no subject) (by Ihor Nehrutsa)
to Alex
Try to delete all ladder.h and ladder.h_ in the project directory, and then select the menu 'Compile CCS C for PIC' again.
(no subject) (by Alex)
thanks a lot Ihor, it now works disabling pull up resistors :)
i have found an issue, when pressing a Xtop in simulation ldmicro closes: https://www.youtube.com/watch?v=cGmygp-J_SE&feature=youtu.be https://github.com/LDmicro/LDmicro/issues/132 ladder attach
Ldmicro close (by MedTronic)
Me too when testing the program and while changing one input ... ldmicro closed .... please help
Ldmicro close (by Milan)
Me too...closing while i changing input..
Ldmicro close (by john)
Me too.
I' ve put a contact and a coil and when simulating suddenly it closing. I get back to previous version since i found stabilized new one.
Force Close (by Yohan)
I have any problem with simulation mode on ld micro last version, when i press key Ctrl + M, my application like exit anyway.
Can u help me?
simulation mode problem. (by Rajeev Rawal)
simulation mode problem.
(no subject) (by Alex)
Hello, i was making a ladder program for practicing but out of curiosity i pressed "PC LPT COM" in microcontrollers , after that my ladder closed and i canīt open it anymore, everytime i try to open my ladder a message is shown (see iamge 1) then ldmicro stops working after pressing OK.
(no subject) (by Alex)
image 2
LDmicro fails to compile HEX file for ATmega48 (by Ziggy)
Apologies for not sending this directly to the email address.. seem to have misplaced it.
When attempting to compile a diagram incorporating a PWM function the compilation result is an empty hex file when the PWM frequency is is not one of the possible frequencies and is some value far away from the option(s). In the past this would have been reported and nearest frequency selected and implemented by LDmicro during compilation process producing a valid HEX file.
(no subject) (by Alex)
will there be new releases for ldmicro?
I donīt want to sound demanding
(no subject) (by MGP)
I only hope for a bugfree V4430. It shuts down to much.
(no subject) (by Ziggy)
Yes...
I wonder how Ihor is doing? He has been putting a lot of effort into LDmicro...Is he happy with our response?
(no subject) (by MGP)
I think he has bought a Nextion display and has a lot of work with that ;)
(no subject) (by Tom J.)
Oh, wow! I hope he posts his progress with it. Being able to use a simple HMI with LDMicro would be amazing.
Post a reply to this comment:
|
|
|