|
LDmicro Forum - adc |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
adc (by robi)
are its posable to read 24 bit adc by software in ldmicro. please help
(no subject) (by Ihor Nehrutsa)
at page
https://www.microchip.com/ParamChartSearch/Chart.aspx?branchID=1012 Max A/D Resolution is 16 bits Maybe you meant an external ADC converter?
(no subject) (by robi)
Yes i means external adc.
(no subject) (by MGP)
No, you cannot because 24bit = 16777215 decimal and the max integer in LDmicro is 32767.
And further, 24bits adc can only be used by specialists in hardware with sensitive measuring device.
(no subject) (by robi)
as max integer 32767 can we use 16 bit adc. ???. please post one example
(no subject) (by MGP)
No, 32767 is 15bit, bit 16 is used as + or - sign.
Most of the adc chips are I2C or SPI and ldmicro does not support this interface. What's wrong with the build-in 10 bit adc because I suspect you do not really know what you really want, given the questions you ask. Do you have a schematic?
(no subject) (by robi)
dear mpg
i want to try for load cell reading by ldmicro. i want to make scale for 100 kg .that resolation 1 kg.
(no subject) (by robi)
sorry for 1000 kg
(no subject) (by MGP)
With 10bits you have 1023 dec, so 1023 (0 to 5V) = 1000kg
The resolution is 1000/1023 = 0.97 or 1kg this is what you ask. Look here for inspiration: http://cq.cx/interface.pl
(no subject) (by robi)
thanks i will try this .
Post a reply to this comment:
|
|
|