|
LDmicro Forum - LDmicro.GitHub news v4.0.B |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
LDmicro.GitHub news v4.0.B (by Ihor Nehrutsa)
https://github.com/LDmicro/LDmicro/releases/tag/4.0.B
== Release 4.0.B * Added: PWM CCP1 on Timer1 module for PIC16F877, PIC16F887. * Added: Menu->File->Save LDmicro0.1 file format v2.3 compatible ->Save LDmicro0.2 file format LDmicro saves new LD files in LDmicro0.2 file format. LDmicro does not change the format of the previously created LD files. You can convert file format with this menu. * Fixed: MASTER CONTROL RELAY SAMPLE\MasterRelay-Test.ld added. * Fixed: "Save as.." cyclic bug.
(no subject) (by MGP)
Many many thanks.
master control relays (by pacifico)
thanks
(no subject) (by Samukelo Shezi)
A big 'thank you' for your unwavering efforts Ihor, to make LDMicro better and better. Thank you to the main man, Jonathan also. Thank you to the forum members who continue to keep this community alive with their wonderful ideas. MGP, (Ik se 'baie dankie' vir u, Mineer). Thank you all. God bless.
(no subject) (by Alex)
First of all, i am very grateful for all your work, this ldmicro version is getting better and better. :)
When i compile hex or ansi c another ldmicro screen is openned with an error menssage, but nevertheless created hex and ansi c work ok, i am using windows 7 i donīt know if it is the problem, thanks a lot again :) attach image
(no subject) (by Alex)
when i compile HEX
(no subject) (by Alex)
when i compile ansi c
(no subject) (by bfwolf)
To Alex, to Ihor...
Hi Alex, i think you forgot to extract the .BAT files to the installation-directory of ldmicro... An other problem could be, that you used spaces in the .LD file which is never a good idea and very often results in problems! Better use '-' or '_' to make the filename structured! ;) LDmicro should place double " around the paths given to the .BAT files to overcome this. -> Ihor! Hi Ihor, thank you very much for your work and time so far! Regards
(no subject) (by Alex)
To bfwolf:
Thanks a lot for your reply, i donīt understand very well about the bat files, but i checked the ldmicro directory and some bat files are there (image attach), you mean these bat files? :)
(no subject) (by Alex)
sorry, here the image
(no subject) (by Alex)
i compiled with "_" and got the same mesage
(no subject) (by Alex)
i press "accept" (image attach)
(no subject) (by Alex)
finally i get the image
(no subject) (by Alex)
hex works ok, ansi c works too, it is just the error message, i donīt know if i am doing wrong.
(no subject) (by bfwolf)
To Alex:
You uses a directory-name containing spaces 'ldmicro 4.0B' in the path. I suppose, this is the problem! Rename it to 'ldmicro_4.0B' and try it again. LDmicro must enclose ALL pathnames in double " to avoid problems like this, because the windows-command-interpreter thinks the command ends at the first space (' ') if no double " are around... ;)
(no subject) (by Alex)
To bfwolf:
You were right!!! :) now it works ok, no message error anymore , thank you very much for your explenation and reply :)
Post a reply to this comment:
|
|
|