|
LDmicro Forum - ldmicro new version |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
ldmicro new version (by humberto)
hi Jonathan
I'm working with ldmicro, I congratulate you excellent work. You trtabajr possible with I2C or SPI in the next version? when piensar out thanks Humberto
V4.0 (by segar)
The new version 4.0 LDmicro software ,if have support to SPI communication support its excellent to have interface
(no subject) (by MGP)
@Segar, how do you do that, it's written that all the instructions with a EDIT in front are not working, you can only edit those instructions not compile.
SPI (by segar)
(by MGP
I not trying out this communication as well in the LDmicro software, i understand that from (Jonathan) its cannot support. now i am doing LCD interface with PIC16F877 , PIC16F876 this i try to do programming use UART communications, with PROTEUS software, its works in the simulation TERMINAL but in the lcd Its not work UART, i still try to doing ,not completed. if have any one done please need help too ,thanks
Conversão para Arduino (by Gilmar Roberto)
Hello Jonathan, thank you very much for providing this excellent software. It's been a while since I've used your program in my projects. Very good indeed. I'm recently using Arduino to work with LDmicro as well. But in the last version, in the conversion to the Arduino I had some bugs in the timer. When I increased one more line, one of the timers timed out. If you can help me find the error, I sent you the programs I did for your analysis.
(no subject) (by Ihor Nehrutsa)
to Gilmar Roberto
I do not completely understand your question. Calculating of the timers delays are changed in v3.5.3 and v4.3.6 https://github.com/LDmicro/LDm....-in-v2.3-and-v3.5.3-and-later Save LD as LDmicro0.2 file format and try to change the Adjust parameter of the timer.
bugs (by Gilmar Roberto)
Good Morning. I edit my program in LDmicro and when simulo works correctly. But when I compile for the Arduino and simulate the proteus, it does not work properly. I have tried the new versions, but the error continues. I will attach one of the programs I made that contains a button to trigger the closing engine that does not work, because I am using an analog input.
Bugs (by Gilmar Roberto)
In this project I changed the timer by a counter, to see if I could solve the problem, but it did not work. I'm using all Arduino's digital I / O and there are only left over analogues to use. That's why I need you to work with a digital input. I made the correct settings to use these inputs but it does not work, ie the button or momentary key that I put in these inputs does not work.
Protoboard for testing (by Gilmar Roberto)
I am attaching the protoboard to test the Server.ld program on Proteus after compiled. Thanks if you can help me find this bug, because I'm sure it will help others too. I await information.
(no subject) (by MGP)
Very difficult to follow your program without comment.
If you have a question makes it us as easy as possible, so you have a better chance of a decent answer. If we have to search for hours, it makes no sense for us. For example: for what serve those buttons .... etc. Btw. I dont have Proteus..
(no subject) (by Ihor Nehrutsa)
to Gilmar Roberto
Can you publish the Proteus project?
(no subject) (by Ihor Nehrutsa)
Proteus 8.4
(no subject) (by Alex)
in a fast check, maybe it would be that your are using external pull down resistor in your arduino nano, ldmicro generates HEX code that enables internal pull up resistor of your arduino, if it is that case there are 2 options:
Option 1: in youe ladder you can disable internal pull up resistor by using option "MOVE" then entering those numbers and letters: --{MOV #0x55:=}-- --{ 0x10}-- Option 2: If you don´t want to enter those numbers and letters then you have to ground all your switches and buttons and denied them all, see image. I woul prefer using option 1, hope it helps
bug LDmicro (by Gilmar Roberto)
Thank you Nehrutsa and Alex for replying. I recorded the simulated video in proteus, but it is not possible to send because the space is only 5mg.
I'll comment on my program, then send you a copy to compile and analyze, to see where the problem is. But I would like to say that if I record this program on a PIC16f628 the program works correctly. In conversion to the Arduino is that several bugs occur. In my project I use in the Arduino scketch other functions to call a servomotor, a vibrator and the ultrasound hc sr04.
(no subject) (by Gilmar Roberto)
In the attached program I made some comments for your analize and to facilitate the simulation in the proteus according to the scheme that I sent. I await your opinion.
(no subject) (by Gilmar Roberto)
I sent the wrong file, the correct one is attached.
Background Ldmicro (by Juan )
El color de fondo negro deseo cambiarlo a blanco, no se ve claro, como se puede hacer?
Post a reply to this comment:
|
|
|