|
LDmicro Forum - 16f628 |
|||
|
|
|
(you are viewing a thread; or go back to list of threads)
16f628 (by Frank Pac)
Salve. I have some 16f628 but I can not write a working code.
With the 16f876 I can easily but with the 628 though LDmicro compiles the code in the pic does not work. The pic are new and tested, I can not make a flashing led. Thank you all.
16f68 OK! (by Magno (Brasil))
Hello Frank Pac by chance this week I worked with these two microcontrollers and I can assure you that it is possible pragrama them LDmicro. usalos also tested without crystal oscillator (changing it's time to burn the HEX) for configuring internal RC, worked very well.
Thanks (by Frank Pac)
Thanks for the reply, I have to try again.
To use the internal oscillator that uses settings on LDmicro? I have noticed that even if I set the external crystal programmer is always set to HS and not XT.
(no subject) (by Frank Pac)
I've solved!!
The programmer set the MCLR and i non set on +5V the pin. :-)
(no subject) (by Magno (Brasil))
OK! Abraço
16F628A dahili osilatör (by AYKUT MISIR)
How do I make the MCU active 16F628 internal oscillator? ldmicro the settings transaxle? thanks
(no subject) (by MGP)
Compile your program with 4MHz crystal setting
Edit the hex file with a hex editor. And change a byte (see the attached file) I do this all the time.
Bumble bee software (by ibrahimattaka)
would you please some one give me source of Bumble bee software
(no subject) (by Ihor Nehrutsa)
to ibrahimattaka
You can change PIC Configuration Bits by LDmicro menu->Settings->MCU Parameters... https://github.com/LDmicro/LDmicro/wiki/PIC-Configuration-Bits https://github.com/LDmicro/LDmicro/wiki/PIC-Configuration-Bits-(part-2)
up preset counter (by Sourabh Pendkar)
We've uploaded this program in 16F628,but failed to operate the counter.
Is our program correct? plz suggest suitable correction.
Post a reply to this comment:
|
|
|