Home
Prox / RFID
Verichips
Ladder Logic
[interfacing] †
Tube Joints
Key Code From Photo
SolveSpace (3d CAD)
SketchFlat (2d CAD)
Photographs
Miscellany
Resume / Consulting
Contact Me

LDmicro Forum - please helpme reset the set coil

(you are viewing a thread; or go back to list of threads)

please helpme reset the set coil (by setyo)
I want to make a ladder for the color sensor. program will be changing LED light. adc and each value would be being compared to then get the color of items in the sensor. I am confused with its coil sets. always active. about about anyone can help me. how to turn off the set coil. Tx
Sun Sep 11 2011, 20:37:36, download attachment blink2 3detik paling anyar anyar neh.ld
(no subject) (by Jonathan Westhues)
Your program contains relays with set-only coils. This means that when the input to that coil is true, the relay will get set to 1. When the input to the coil is false, the state of the relay will be unchanged.

So the relay can never get reset back to 0, which isn't useful. Add a reset-only coil with that same name, by adding a coil in the usual way and then choosing Instruction -> Make Reset-Only.
Tue Sep 13 2011, 01:15:32
(no subject) (by MGP)
Post your schematic in jpg, bmp or gif.
There are errors in your program but ... which sensor do you use?
For each color you use the same analog input?
Tue Sep 13 2011, 03:26:08
(no subject) (by setyo)
tx for the answer jonathan.. now i want to make a ladder save to eeprom.
This program will run the conveyor when the start button is pressed .. when the power failure is also why the program died after they were stored in eeprom? thanks
Sat Sep 17 2011, 21:39:28, download attachment nyoba konveyor, pendorong1, pendorong2.ld
Post a reply to this comment:
Your Name:
Your Email:
Subject:
(no HTML tags; use plain text, and hit Enter for a line break)
Attached file (if you want, 5 MB max):