LDmicro0.2 CYCLE=10000 us at Timer1, YPlcCycleDuty:0, ConfigurationWord(s):0x0 CRYSTAL=16000000 Hz BAUD=9600 Hz, RATE=1000000 Hz, SPEED=100000 Hz PULL-UP LIST END VAR LIST END IO LIST Xnew1 at 0 0 0 Xnew10 at 0 0 0 Xnew11 at 0 0 0 Xnew2 at 0 0 0 Xnew3 at 0 0 0 Xnew4 at 0 0 0 Xnew5 at 0 0 0 Xnew6 at 0 0 0 Xnew7 at 0 0 0 Xnew8 at 0 0 0 Xnew9 at 0 0 0 Ynew1 at 0 0 0 Ynew11 at 0 0 0 Ynew2 at 0 0 0 Ynew4 at 0 0 0 Ynew6 at 0 0 0 Ynew8 at 0 0 0 END PROGRAM RUNG 1 COMMENT Ya que veo varias escaleras que tienen errores. he echo un programa de LDMicro, para que vean como se monta las variables y corregir esos problemas de codificacion por el programador y no son herrores del programa LDMicro.\r\nSince I see several stairs that have errors. I have done a program of LDMicro, so that they can see how the variables are mounted and correct those problems of codification by the programmer and they are not buggers of the LDMicro program. END RUNG 2 COMMENT La escalera esta hecha para poder simularla, y tendran que ver en la simulacion como las Salidas (Y) se activan o no se antivan, la verda que cuando se hace una escalera bastante grande es dificil de verlo si no se save, \r\nThe ladder is made to simulate it, and they will have to see in the simulation how the outputs (Y) are activated or not, the truth is that when a large ladder is made it is difficult to see it if it is not saved, END RUNG 3 COMMENT Mi esperencia con Aytomatas, es que las entradas las podemos repetir tantas veces como sea necesario pero las salidas solo se pueden repetir una sola vez, como las Marca internas(En automatas (M)) = Reles internos ( En LDMicro (R)).\r\nMy expectation with Aytomatas, is that we can repeat the entries as many times as necessary but the outputs can only be repeated once, such as internal Marks (In automatas (M)) = Internal relays (In LDMicro (R)) END RUNG 4 COMMENT Si no se entiende o tienen dudas, pueden contactar por esta misma via, y antetodo discurparme por mi ingles,\r\nIf you do not understand or have doubts, you can contact by this same way, and first of all apologize for my English, END RUNG 5 COMMENT Correcto: \r\nCorrect: END RUNG 6 CONTACTS Xnew1 0 0 COIL Ynew1 0 0 0 0 END RUNG 7 PARALLEL CONTACTS Xnew2 0 0 CONTACTS Xnew3 0 0 END COIL Ynew2 0 0 0 0 END RUNG 8 COMMENT incorecto:\r\nincorrect: END RUNG 9 CONTACTS Xnew4 0 0 COIL Ynew4 0 0 0 0 END RUNG 10 CONTACTS Xnew5 0 0 COIL Ynew4 0 0 0 0 END RUNG 11 COMMENT incorecto:\r\nincorrect: END RUNG 12 CONTACTS Xnew6 0 0 COIL Rnew6 0 0 0 0 END RUNG 13 CONTACTS Xnew7 0 0 COIL Rnew6 0 0 0 0 END RUNG 14 CONTACTS Rnew6 0 0 COIL Ynew6 0 0 0 0 END RUNG 15 COMMENT Correcto: \r\nCorrect: END RUNG 16 CONTACTS Xnew8 0 0 COIL Rnew8 0 0 0 0 END RUNG 17 CONTACTS Xnew9 0 0 COIL Rnew9 0 0 0 0 END RUNG 18 PARALLEL CONTACTS Rnew8 0 0 CONTACTS Rnew9 0 0 END COIL Ynew8 0 0 0 0 END RUNG 19 COMMENT incorecto:\r\nincorrect: END RUNG 20 CONTACTS Xnew10 0 0 COIL Rnew10 0 0 0 0 END RUNG 21 CONTACTS Xnew11 0 0 COIL Rnew11 0 0 0 0 END RUNG 22 CONTACTS Rnew10 0 0 COIL Ynew11 0 0 0 0 END RUNG 23 CONTACTS Rnew11 0 0 COIL Ynew11 0 0 0 0 END